6
will pull them together.
Double-check to ensure
that the light is firmly seated
inside the mount and that
it is not askew.
(Figure 4)
To use the light simply twist the
collar to your desired setting.
Make sure that the light is fully
visible from front and rear.
Removing the Light:
(Figure 5)
Turn the light to the off position.
Simultaneously twist the
light body counterclockwise
and gently pull.
Charging
(Figure 6)
•
Remove the light body
from the handlebar/
seatpost mount, and
fold back the protective
rubber cover to reveal the
USB-C charging port.
•
Insert USB-C cable firmly.
•
A charge indicator will
begin to flash to help you
gauge how much time is
left until full charge.
-0-33%charge:Redflash
-34%-66%charge:Yellowflash
-67%-99%charge:Greenflash
- 100%: Solid Green
• Once charged, replace the
protective cover and ensure
that it is seated properly
prior to using the light.
Charging Best Practices
•
Charge at room temperature.
•
Charge using only a Class II
electrical CEL or UL approved
USB charger rated for 500mA
or greater with double
insulation against hazardous
voltages. The charger’s output
voltage must not exceed 5V
•
Do not overcharge - this
will shorten battery life.
•
Do not leave lights
unattended while charging.
•
Charge at regular intervals
when light is not used for
extended periods of time.
•
Avoid draining the
battery completely and
do not store the light in a
ENGLISH
