23
APPLIES TO
OPTIONAL HYDRAULIC DRIVE
VERSIONS
OPERATING INSTRUCTIONS WITH HYDRAULIC DRIVE
DIESEL FLUSH - 4
18.
Close main tank valve
#16
and recirculation valve
#24
. Start engine
#23
.
19.
Open diesel flush valve
#15
on the bottom of the diesel tank
#12
.
20.
Open spray hose feed valve
#25
and spray wand valve
#27
to flush the spray
hose and wand. To flush the spray bar open spray bar feed valve
#38
or the
lever
(optional)
on the spray bar
#31
to the open position. When done, turn
off the engine and close all open valves.
21.
Use only
diesel fuel
for flushing purposes.
22.
Remove the lid from the basket strainer
#17
and clean the basket.
Anytime you notice the spray pressure is decreasing, the
basket strainer
#17
probably needs to be cleaned. Make sure you close main
tank valve
#16
before you remove the lid.
MAINTENANCE TIPS - 5
23.
The material pump
#22
has a mechanical seal, some leakage is normal. When
the seal plate cannot be tightened any more, the seal must be replaced.
24.
The orifice is inside burner
#11
, needs to be cleaned occasionally. Soot and
spider webs can cause blockage of the flow of gas.
25.
Always leave the LP gas hose
#6
connected to a tank. If left
disconnected, insects will make their nest inside of it and block the flow of
gas.
Summary of Contents for SealMaster 300 Series
Page 1: ......
Page 7: ...5 SAFETY PRECAUTIONS AND CAUTIONS FIRST AID ...
Page 34: ...32 PUMP DIAGRAM 16 j j I ...
