Thorn security LT42THL3DS1, Owner'S Manual, Page: 14 / 54

Connecting a Computer through VGA input
Remove power from the LCD (unplug from the wall
Outlet) and external equipment before connecting cables.
1. Connect the LCD to the computer using the VGA
(D-Sub 15 PIN) cable.
2. Connect the audio output of the computer to the VGA-Audio
input on the LCD TV with an audio cable (not supplied)
3. Please ensure the Power Cord is connected before it is operated.
4. Press POWER to turn on the LCD, then turn on the computer.
5. The LCD and Computer are working at the same time.
Press INPUT on the remote or INPUT on the right rear of the TV
set to enter into Input Source Menu.
6. Press the button to select PC and press ENTER to confirm .
Now your T V can be used as a PC monitor.
Connections
Connecting an Antenna
Unplug the power cord cable from the mains outlet before connecting
or disconnecting the antenna.
Connect the RF Coaxial Cable (75 ) (not supplied) to wall antenna
socket or jack.
Connecting directly to mobile
hard disk or flash drive
remove power cord from the LCD(unplug from the wall outlet)
beforeconnecting flash drive or mobile hard disk.
1.Connect flash drive or mobile hard disk to Media interface.
2.Please ensure the power cord is connected before it is operted.
3.Press the Power to turn on the LCD.
4.Press the INPUT button to select Media signal source.
5.Press the and ENTER button to confirm your INPUT soucre.