Thorn security LT42THL3DS1, Owner'S Manual, Page: 10 / 54

Install the remote control batteries
-Turn over the remote control, open the battery cover.
- Insert two 1.5V (AAA) batteries into the compartment, take care to observe the and markings
indicated inside.
- Replace the cover until the lock clicks into place.
Note:
- Ensure the remote control is pointed towards the remote controlsensor on the right bottom
of the front panel.
- No obstacles should be placed between the remote control and the remote control sensor.
- Operate the remote control within a 5-metre range and an angle of 60 degrees. The remote
control may not work correctly if it is operated out of range or out of angle.
Care For Remote Control
- Avoid spilling liquids on the remote.
- Avoid dropping the remote.
- Always store the remote control in a dry and normal room temperature environment.
- If the remote is not performing satisfactorily, replace the batteries.
- I f t he r emote c ontrol w
ill n ot b e u sed f or a l ong t ime ( over 1 m onth), p lease t ake o ut t he b atteries t o
avoid leakage.
- If the batteries have leaked, clean the battery compartment with a slightly damp cloth, use
gloves to ensure no chemicals come into contact with your skin and allow to dry thoroughly
before inserting new batteries.
- Do not mix new and used batteries.
- Keep batteries out of children's reach.
- When there is a strong ambient light source, the performance of the infrared remote sensor
may be degraded, causing unreliable operation.
- Batteries contain chemical substances, so they should be disposed of properly .
Remote Control
Position the TV
Warning:
1.Do not insert the power plug into the wall socket before all the connections are made.
2.Large screen TVs are heavy.Two people are required to carry and handle the TV.
3.Before you move the TV,disconnect the cables to prevent breakage.
Always ensure that you have easy access to the power cord or plug to disconnect the TV from the
power.
The TV is mounted on a swivel base,ensure no strain is placed on the power cord when the TV is
swivelled,Strain on the power cord can loosen connections.
For ideal viewing conditions,position the TV where light does not fall directly on the screen.