THORLABS SP USB Series, Operation Manual

Page: 31 / 65

29 Operating Instruction
© 2008 Thorlabs
Figure 33 Peakfinder
In order to specify the relevant peaks the peak width and the peak threshold can
be set. A higher threshold and a higher peak width will reduce the found peaks.
By pressing the "Calculate" button the peaks specified by those two parameters
are calculated and the list is filled with the found peaks. You can mark a peak in
the window by a left double click on the desired peak in the list. This peak will be
marked by a colored line in the graph.
The peaks can be sorted by amplitude or wavelength and can be iterated with the
help of the arrow buttons ("<<" and ">>").
Only one peak can be marked at the same time, but you can export the full list
into a tab seperated text file with the "Export" button.