Liquid Light Guide Adapter with Shutter
Chapter 4: Setup and Operation
Page 6
CTN008800-D02
Chapter 4
Setup and Operation
4.1. Connection
Guide
1. Remove components from the case.
2. Secure the SLSLLG2 to your setup using the SM2 thread. In this
process, you can use the SM2 nut to lock the SLSLLG2 at any direction
you want, such as keeping the cable downward.
3. Connect the AC power cord to the power supply and then connect to the
AC power outlet. The SLSLLG2 is supplied with an external AC-DC
switching power supply rated at 100 – 240 VAC, 47 – 63 Hz, and 5 VDC
at 2.4 A maximum output.
4. Place the controller on a flat surface. Connect the mini-DIN connector
from the shutter head, with the arrow on the connector pointing up, into
the controller.
5. Turn the unit on by pressing the power button.
4.2. Exchanging LLG Adapters and Adjusting Adapter
Position
4.2.1.
Dismantling and Installing the LLG Adapter:
Figure 5
1. Use a spanner wrench (Item # SPW602) to remove the retaining ring,
then remove the installed LLG adapter by hand.
2. Position the desired LLG adapter, then lock it in place by tightening the
retaining ring using the spanner wrench.
LLG Adapter
Retaining Ring
Spanner Wrench
