© 2016 Thorlabs GmbH
64
PM320E
8.3 Certifications and Compliances
Category
Standards or description
EC Declaration of
Conformity - EMC
Meets intent of Directive 2004/108/EC
1
for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 61326-1:2006
Electrical equipment for measurement, control and laboratory use – EMC
requirements:
Immunity: complies with basic immunity test requirements
2
.
Emission: complies with EN 55011 Class B Limits
2,4
,
IEC 610003-2 and IEC 61000-3-3.
IEC 61000-4-2
Electrostatic Discharge Immunity (Performance Criterion A)
IEC 61000-4-3
Radiated RF Electromagnetic Field Immunity (Performance Criterion A)
5
IEC 61000-4-4
Electrical Fast Transient / Burst Immunity (Performance Criterion A)
IEC 61000-4-6
Conducted RF Immunity (Performance Criterion A)
IEC 61000-4-8
Power Frequency Magnetic Field Immunity (Perf. Criterion A)
IEC 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity
(Performance Criterion A / C
7
)
IEC 61000-3-2
AC Power Line Harmonic Emissions
IEC 61000-3-3
Voltage Fluctuations and Flicker
FCC EMC Compliance Emissions comply with the Class B Limits of FCC Code of Federal Regulations 47, Part 15, Subpart
B
2,4
.
EC Declaration of
Conformity - Low
Voltage
Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Communities:
Low Voltage Directive 2006/95/EC
6
EN 61010-1:2001
Safety Requirements for Electrical Equipment for Measurement, Control
and Laboratory Use - Part 1: General Requirements
U.S. Nationally
Recognized Testing
Laboratory Listing
UL 61010-1 2
nd
ed.
Canadian Certification
CAN/CSA C22.2 No.
61010-1-04
Additional Compliance
IEC 61010-1:2001
Equipment Type
Test and Measuring
Safety Class
Class I equipment according to IEC 60950-1:2001
1
Replaces 89/336/EEC.
2
Compliance demonstrated using high-quality shielded interface cables shorter than or equal to 3 meters.
4
Emissions, which exceed the levels required by these standards, may occur when this equipment is connected to a test object.
5
Modulation input port capped at IEC 61000-4-3 test.
6
Replaces 73/23/EEC, amended by 93/68/EEC
7
Performance Criterion C was reached at additional test levels according to EN 61326-1:2006 table 2