THORLABS PM10-3, Operation Manual

Page: 23 / 32

5 Appendix
Rev: 1.0, 15-Mar-2021
Page 18
PM103
PM103A PM103U
Remote Interfaces
Remote Interface Type 1 USB 2.0 (High Speed)
Connector Mini-B USB, lockable
Measurement Speed 1 kS/s + 100 kS/s bulk mode
Remote Interface Type 2
RS232
Connector DA-15 Pin 7/8 NA NA
Baud Rate
9600 - 230400 Bit/s
Default: 115200 Bit/s
NA NA
Settings N1S NA NA
Measurement Speed
200 sps + 100 kS/s
bulk mode
NA NA
Analog Output AO2, Configurable
Connector DA-15 Pin 5 SMA NA
Signal
Gain Signal Configur-
able
Gain Signal Configur-
able
NA
Voltage Range 0 to 2.5 V 0 to 2.5 V NA
Accuracy ±1% ±1% NA
Bandwidth 1 kHz 1 kHz NA
Analog Output AO1, Not Corrected
Connector DA-15 Pin 4 SMA NA
Signal
Amplified Input Signal -
Not Corrected
Amplified Input Signal -
Not Corrected
NA
Voltage Range -0.25 V to 2.5 V -0.25 V to 2.5 V NA
Accuracy ±3% ±3% NA
Bandwidth
up to 1 MHz, Depend-
ent on Sensor and Set-
tings
NA NA
Auxiliary Temperature Measurement
Connector DA-15 Pin 14 NA NA
Supported Temperature Sensor
Thermistor NTC
0.1 - 100 kΩ,
B-Value:
1000 - 9999 K
NA NA
Temperature Measurement Range
-40 °C to +200 °C
(NTC dependent)
NA NA
Digital Control Pins I/O
Connector DA-15 Pins 2/3 SMA NA
Function
2 x GPIO
or Configurable as
Trigger Input/Output,
Pass/Fail Analysis
GPIO or Configurable
as Trigger Input/Out-
put
NA
Power Management
DC Input 1 / Connector
+5 VDC to +36 VDC /
DA-15 Pins 1, 9
NA NA
DC Input 2 / Connector 5 V / USB
Power Consumption 1 W
Display
Display Type None; External PC - Windows Application or Driver Set
Display Screens Windows Application Software Provided
GUI Refresh Rate 1000 Hz (Dependent on PC and Settings)