background image

Rev 11 Oct 2018

Page 3

Chapter 2

Safety

Chapter 2

Safety

2.1

Safety Information

For the continuing safety of the operators of this equipment, and the protection of the
equipment itself, the operator should take note of the 

Warnings, Cautions

 and 

Notes

throughout this handbook and, where visible, on the product itself.

The following safety symbols may be used throughout the handbook and on the
equipment itself.

2.2

General Warnings and Cautions

Warning: Risk of Electrical Shock

Given when there is a risk of injury from electrical shock.

Warning

Given when there is a risk of injury to users.

Caution

Given when there is a risk of damage to the product.

Note

Clarification of an instruction or additional information.

Warning

If this equipment is used in a manner not specified in the handbook, the
protection provided by the equipment may be impaired. In particular, excessive
moisture may impair operation.

Spillage of fluid, such as sample solutions, should be avoided. If spillage does
occur, clean up immediately using absorbant tissue. Do not allow spilled fluid to
enter the internal mechanism.

The equipment is for indoor use only.

Warning

To avoid injury never put any part of your body in the gap between the moving
platform and a rigid structure.

Summary of Contents for NR360S





















Reviews: