5.2.
MPH16 GUI (Graphical User Interface)
The MPH16 GUI consists of the menu and display area.
Figure 5–18 MPH16 Control Window
5.2.1. Display Area
The display area allows you to select 16 preset motorized pinholes with dia-
meters ranging from 25 µm to 2 mm. This panel also allows you to adjust the
alignment.
●
Select Pinhole Size:
Select the desired diameter of the pinhole
from one of 16 options.
●
Alignment:
Adjusts the pinhole alignment via GUI control. Use
the
Go
button to initiate position adjustment. Once alignment
has been achieved, use
Set
to save the alignment position
setting for the specific pinhole size.
Page 18
TTN202954-D02
Motorized Pinhole Wheel, Uncoated
Chapter 5: Software
Summary of Contents for MPH16-UC
Page 1: ...MPH16 UC Motorized Pinhole Wheel Uncoated User Guide...
Page 42: ......
Page 43: ...www thorlabs com...
