THORLABS M F1 Series, Operation Manual

Page: 5 / 28

© 2012 Thorlabs
1 General Information
3
1 General Information
1.1 Safety
Attention
All statements regarding safety of operation and technical data in this instruction
manual will only apply when the unit is operated correctly as it was designed for.
Optical power density out of the output connector or fiber tip may be hazardous to
human eye - do not look into the connector or fiber aperture.
All modules must only be operated with proper shielded connection cables.
Only with written consent from Thorlabs may changes to single components be carried
out or components not supplied by Thorlabs be used.
This precision device is only serviceable if properly packed into the complete original
packaging including the plastic foam sleeves. If necessary, ask for a replacement
package.
1.2 Ordering Codes and Accessories
Ordering Codes
MxxxF1 - Fiber coupled mounted LED, xxx stands for the wavelength, see section Technical
Data
.
Optical Fiber
We recommend to use MMF (multimode fiber). Connection to MxxxF1 must be made via a
SMA fiber connector.
Optical output power is specified for a 400µm MMF with a numeric aperture of 0.39 at the max.
allowed LED current. Optical power increases proportionally to the core diameter and nearly
with the square of NA.
1.3 Parts List
Inspect the shipping container for damage.
If the shipping container seems to be damaged, keep it until you have inspected the contents
and you have inspected the MxxxF1 Series mechanically and electrically.
Verify that you have received the following items within the package:
1. MxxxF1 Fiber Coupled LED
2. Operation Manual
6