Page 8
ETN053043-D02
LNR502 Long Travel, Linear Stage with Stepper Motor Actuator
4.3.3 Building an XY Configuration
Bolt the X-axis stage to the work surface as detailed in Section 4.3.2. then, referring to Fig. 4.2, proceed as follows:
1)
Fit the dowels supplied to the moving platform of the lower stage.
2)
Fit the spacer plate (LNR50P3) into place as shown below, ensuring that the dowels in the lower stage locate correctly in
the holes in the bottom surface of the spacer plate.
3)
Fit a bolt (M6 x 12
mm
or 1/4
"
-20 x 1/2
"
, not supplied) through the hole in the center of the spacer plate and into the top
platform
of the lower stage. Tighten the bolt to secure the plate in position.
Fig. 4.2 Fitting a Spacer Plate
3
2
1
Summary of Contents for LNR502
Page 20: ...www thorlabs com ...
