Page 31
ETN051885-D02
K-Cube Inertia Piezo Motor Driver
4.5.11 Menu Option - Select Stage
This option allows the type of stage/actuator being driven
to be selected. Once this selection has been made, the
server automatically applies suitable default parameter
values on boot up of the software
It is important to select the correct stage and axis type.
Selecting an incompatible stage/axis type could result in
reduced velocity and/or resolution, and in the worst case
could cause the stage to run into the end stops.
Press the MENU button, then use the wheel to scroll
through the menu options.
Press the MENU button to enter the Select Stage option.
Use the wheel to select the stage being driven, either ‘PIA’
for our PIA series Inertial Piezo Actuators, or PD(R) for
one of our PD series Inertial Piezo Stages. The stage type
selected is displayed on start up - see Fig. 3.4.
Then press the MENU button to store the selection and
return to the main display.
MENU
S e l e c t S t a g e
P I A
MENU
MENU
Wheel
M e n u o p t i o n s
U s e W h e e l
M e n u o p t i o n s
1 0 S e l e c t S t a g e
K I M 0 0 1
C h 1 0
C h 1 0
K I M 0 0 1
