INTUN Tunable Laser
12372-D02, 12/15/2007
Page 16
www.thorlabs.com
Part 4. Power Supplies
The TL-F control box, which is shown below, provides all the power and control signals necessary to
run the INTUN TLX-T laser. More details about this all-in-one control box can be found in the next
section.
Figure 10: TL-F control box for the INTUN TLX-T laser.
Alternatively, three user-supplied external power supplies can be used to run the INTUN TL-T unit. If
using this option to power the INTUN laser, the DC Power Supply table below lists the required
voltages; the specifications that these power supplies should meet are outlined in the DC Power Supply
Requirements table. In addition, the pin configuration of the DC power connector can be found on page
29. The full pin configuration of the INTUN TL-T power and signal connectors are shown on page 28.
