THORLABS INT-POL-1300, Operation Manual

Page: 26 / 28

5 Appendix
INT-POL-1300 / page 20
5.6 List of Figures
Figure 1: Switchable power supply for 100 V, 120 V, or 230 V ................................... 4
Figure 2: Functional block diagram of the INT-POL-1300 ........................................... 6
Figure 3: INT-POL-1300 detector responsivity ........................................................... 7
Figure 4: INT-POL-1300 RF OUTPUT frequency response ....................................... 9
Figure 5: INT-POL-1300 MONITOR output frequency response .............................. 10
Figure 6 Schematic setup for PS-OCT ..................................................................... 10
Figure 7: Crossed out “wheelie bin” symbol .............................................................. 19
5.7 List of Acronyms
The following acronyms are used in this manual:
BW Bandwidth
C Collimator
DAQ Data Acquisition
G Galvano Scanner
ILP In Line Polarizer
M Mirror
NEP Noise-equivalent Power
OCT Optical Coherence Tomography
PBS Polarization Beam Splitter
PC Polarization Controller
PS-OCT Polarization Sensitive Optical Coherence Tomography
RF Radio Frequency
SOP State Of Polarization
SS Swept Source
VA
Variable Optical Attenuator