
© 2018 Thorlabs
3 Operating Instruction
9
·
Press within these 2 sec. '
UP
' or '
DOWN
' buttons to set the desired wavelength. This mode
will be left automatically 2 sec. after the last key-press and the new wavelength is stored.
3.2.2 Menu
Additional settings but the wavelength can be accessed in the 'Menu Mode'. This mode can be
entered by pressing the
'MENU'
button. To return to 'Main Display Mode' press the
'MENU'
but-
ton again. The ERM100 being in 'Menu Mode' is indicated by an arrow in the upper right corner
of the display pointing to the
'MENU'
button.
To navigate in the 'Menu Mode' use the
'UP'
and
'DOWN'
buttons. If the value of a menu entry
is editable the word 'Set' is displayed in the lower left corner of the Display. Pressing the
'SET'
button enters the edit mode of the selected menu entry. If a menu point is in edit mode, the
'UP'
and
'DOWN'
buttons are used to modify the value and the
'SET'
button is used to save the
new value. If a menu entry is in edit mode a cursor flashes at the position the value will be ed-
ited.
The following menu functions are accessible:
3.2.2.1 Averaging
The ERM100 gains 10 samples per second. With AVERAGING up to 16 samples can be aver-
aged for the display values. A higher AVERAGING value will result in lower display rate. The
AVERAGING value has no effect on the measurement data transferred by the remote interface.
3.2.2.2 Remote State
This menu entry displays the remote state. The following states are possible:
Local
The ERM100 is operated by the front panel. The
'REMOTE'
LED on the ERM100 front is off.
This remote state is not editable.
Summary of Contents for ERM100
