manualshive.com logo in svg

THORLABS ELLB, Original Instructions Manual

Share
Download
THORLABS ELLB Original Instructions Manual Download Page 13

ELLB Distribution Board for Resonant Piezo Motor Products

 

Chapter 6: Thorlabs Worldwide Contacts

 

Rev C Jan 2020 

Page 11

 

Chapter 6  Thorlabs Worldwide Contacts 

For technical support or sales inquiries, please visit us at 

www.thorlabs.com/contact

 for our most up-to-date 

contact information.  

 

 

 

Thorlabs verifies our compliance with the WEEE (Waste Electrical and Electronic Equipment) 
directive of the European Community and the corresponding national laws. Accordingly, all end 
users in the EC may return “end of life” Annex I category electrical and electronic equipment 
sold after August 13, 2005 to Thorlabs, without incurring disposal charges. Eligible units are 
marked with the crossed out “wheelie bin” logo (see right), were sold to and are currently owned 
by a company or institute within the EC, and are not dissembled or contaminated. Contact 
Thorlabs for more information. Waste treatment is your own responsibility. “End of life” units 
must be returned to Thorlabs or handed to a company specializing in waste recovery. Do not 
dispose of the unit in a litter bin or at a public waste disposal site. 

Annex I 

 
USA, Canada, and South America 

 

Thorlabs, Inc.  
[email protected]  
[email protected]  
 

 
UK and Ireland 

 

Thorlabs Ltd.   
[email protected]  
[email protected]  

Europe 

 

Thorlabs GmbH  

[email protected] 

 

 

Scandinavia 

 

Thorlabs Sweden AB  
[email protected]  

France 

 

Thorlabs SAS  

[email protected] 

 

 

Brazil 

 

Thorlabs Vendas de Fotônicos Ltda.  
[email protected]  

Japan 

 

Thorlabs Japan, Inc.  
[email protected]  

China 

 

Thorlabs China  
[email protected]  

 

Summary of Contents for ELLB















Reviews:

No comments

Brands by name

Popular brands

Load more brands