THORLABS ELL10(K), Operating Manual

Page: 9 / 22

ELL10 Linear Stage Evaluation Kit Chapter 3: Installation
Rev. A, Dec, 2017
Page 5
Figure 2 ELL10 with MMP1 top plate fitted, showing stage in backwards/home position
Figure 3 Fixing the ELL10 to the work surface
1. Slide the moving world to one end of travel to gain access to the mounting holes as shown above.
2. Attach the stage to the work surface by passing appropriate standard fixings (not supplied) through the exposed
hole in the PCB and base plate.
3. Slide the moving world to the other end of travel, and repeat item (2).