THORLABS DC2100 Operation Manual Download

Page: 19 / 49

DC2100

3 Operating the DC2100

Figure 19

Autorun Menu

NOTE

Please be aware that you need a VISA engine installed on your system to operate
the DC2100 remote application.

3.2.2.2

Installing VISA Runtime Engine

A VISA runtime 4.3.0 or higher has to be installed on your system to operate the
DC2100 remote application.
You may install the National Instruments

©®

VISA runtime engine provided on the

installation CD. You may also download the latest NI-VISA runtime engine from the
National Instruments

©®

web site (

www.ni.com/visa

In case you want to use the VISA engine provided on the installation CD select 'NI-
VISA

Engine'. An installation wizard will be started. If you are running Windows

VISTA

©®

you might be prompted to change to the 'elevated mode'. Please ask your

administrator for help when you do not have administrator privileges.

Follow the instructions of the installation wizard.

3.2.2.3

Installing the Remote Application

Select 'DC2100 - Application software' from the installation menu to start the
installation wizard. If you are running Windows VISTA

©®

you might be prompted to

change to the 'elevated mode', as shown in the following figure. Please ask your
administrator for help when you do not have administrator privileges.

Summary of Contents for DC2100


















































Search results

Summary of Contents for DC2100

Reviews:

Related manuals for DC2100

Brands by name

Popular brands

THORLABS DC2100, Operation Manual

Search results

Summary of Contents for DC2100

Reviews:

Related manuals for DC2100

Brands by name

Popular brands