HeartMate Universal Battery Charger IFU 10
3
While still holding buttons #1 and #3, turn on the UBC by pressing
the power switch from the off (“0”) to the on (“I”) position.
4
After the “English” display appears (
Figure 8
), release buttons #1
and #3.
5
If “English Text” is the desired display setting, press and release
the #1 button.
Note
: After releasing the button, the charger will
conduct a self test. If the test is successful, “HeartMate
CHARGER” will appear on the screen.
OR
5
If “Graphic Symbols” is the desired setting, press and release the
#2 button to scroll down to “Graphics,” then press and release
button #1.
Note
: After releasing the button, the charger will
conduct a self test. If successful, “HeartMate CHARGER” will
appear on the screen.
Selecting the Language/Display Panel Setting Anytime After Startup
“Graphic Symbols” is the default display mode. Follow these instructions
for changing the display mode anytime after initial setup (see Section 2.0,
Setting Up the Universal Battery Charger (UBC) Before Use
):
1
Remove all batteries from the charging pockets.
2
Turn off the UBC by pressing the on/off switch from the on (“I”)
to the off (“0”) position.
Note
: Do not unplug the charger.
3
At the same time, press and hold buttons #1 and #3 on the front
panel of the UBC.
4
While still holding buttons #1 and #3, turn on the charger by
pressing the power switch from the off (“0”) to the on (“I”)
position.
5
After the display screen appears (
Figure 9
), release buttons #1 and
#3). The UBC will power up.
Figure 8
Display panel showing English language display mode option
