HeartMate Universal Battery Charger IFU 6
Dirt or objects covering the metal contacts inside the pockets may
prevent proper battery charging, which can affect battery
performance.
4
Obtain the grey AC power cord from the product packaging.
5
Plug the female end of the power cord into the power entry module
in the rear of the charger (
Figure 2
). Make sure the cord is fully
inserted and secure.
6
Plug the male end of the power cord into a properly-tested and
grounded (3-prong) AC mains electrical outlet that is not
controlled by a light switch.
Note
: If traveling internationally, you
will need a Thoratec power cord set that is compatible with the
local voltage and that meets applicable national plug, rated voltage,
rated current, and safety agency marks and specifications. Ask
your VAD Coordinator for a Thoratec power cord set, if needed.
7
Turn on the UBC by pressing the on/off switch in the rear of the
charger from the off (“0”) to the on (“I”) position (
Figure 3
).
Note
:
Once the charger is turned on, all lights on the front panel will turn
WARNING!
•
Connect the HeartMate Universal Battery Charger (UBC) only to properly-
tested and grounded (3-prong) AC outlets. Do not use an adapter plug or
portable, multiple outlet (power strip) for ungrounded wall outlets.
•
Ensure the UBC is connected to AC power and is turned “on” before
placing batteries into the pockets for charging
Figure 2
Inserting power cord into power entry module (rear of
Universal Battery Charger)
