THOR THPWM-30 Instruction Manual Download Page 9

8

PRECAUTIONS

 CAUTION: 

If it is a 12V system, the bottom left corner of the LCD display will show '12V', '24V' system will show 

24V. 

 CAUTION: 

The first step is to connect the battery. If the connection is made correctly, the controller screen will 

light up; otherwise, check whether the connection is correct.

 CAUTION: 

The second step is to connect the solar panel. If sunlight is present and strong enough (the solar 

panel voltage is greater than the battery voltage), the sun icon on the LCD screen is on; otherwise, check whether 

the connection is correct. (It's recommended that the operation be performed under the debugging mode).

 CAUTION: 

The thirds step is to connect the load. Connect the load leads to the controller's load output terminal 

and the current shall not exceed the controller's rated current.

 CAUTION: 

As the controller will generate heat during operation, it's recommended that the controller be 

installed in an environment with good ventilation conditions.

 CAUTION: 

Choose cables with large enough capacity for connection, in case too much loss incurred on the 

lines causes the controller to misjudge.

 CAUTION: 

The controller has a common positive pole inside. if grounding is needed, ground the positive pole.

 CAUTION: 

It's important to fully charge the battery regularly. At least one full charging every month is 

recommended and failure to do so may cause permanent damage to the battery. Only when in-flow energy 

outpaces the out-flow energy can the battery be charged fully. Users shall bear this in mind when configuring the 

system.

 CAUTION: 

Check whether the controller's connection terminals is tightened securely; if not, it may suffer 

damage when large amounts of current pass through.

ERROR CODE LIST

Code on LCD screen

Corresponding error

E0

No error

E1

Battery over discharge

E2

Battery over voltage

E3

Undervoltage warning

E4

Load short circuit

E5

Load overload

E6

Termparture too high inside controller

E8

Charging current too high

E10

Solar panel input voltage is too high

Summary of Contents for THPWM-30













Reviews: