THOR THPWM-30 Instruction Manual Download Page 10

9

COMMON PROBLEMS AND SOLUTIONS

Symptoms

Cause and Solutions

LCD screen does not light up.

Check whether the battery is correctly connected.

Incomplete display or no renewal on LCD 

screen.

Check whether the ambient temperature is too low and whether the display 

recovers when the temperature rises.

No charging with sunlight present.

Check whether the solar panel is correctly connected and contact is good 

and reliable. Check whether the solar panel voltage falls below the battery 

voltage.

The sun icon does not light up while the 

solar panel icon does. The battery voltage is 

normal but there is no output.

The load will be switched on automatically after 10 minutes 
(set by the user)

The battery icon flashes quickly and there is 

no output.

System overvoltage. Check whether the battery voltage is too high.

The battery icon flashes slowly and there is 

no output.

The battery is over-discharged and will recover after recharged adequately.

The load icon flashes quickly and there is 

no output.

The load's power exceeds the rated value or the load is short-circuited. 

After the problem is solved, long press the key or wait until ir recovers 

automatically. 

The load and the encircling light ring stays 

lit and there is no output

Check whether the power-consuming device is connected correctly and 

reliably.

Other symptoms

Check whether wiring is sound and reliable and system voltage is correctly 

recognized.

Summary of Contents for THPWM-30













Reviews: