background image

15

SPECIFICATIONS

THMS500-PPI

THMS800-PPI

Output Voltage / 

Voltage De Slida 

120 +- 5 Vac / 120 +-  5 VDC

120 +- 5 Vac / 120 +-  5 VDC

Output 

Frequency / 

Frecuencia De 

Salida

60 Hz

60 Hz

Output 

Waveform / 

Forma De Onda 

Modified Sine Wave / Onda Sinusoida Modificada

Modified Sine Wave / Onda Sinusoida Modificada

Max. Continuous 

Active Power 

Output  / Slida 

De Corriente 

Continua 

500 Watt / 500 Vatios 

800 Watt / 800 Vatios 

Max. Active 

Surge Power 

Output (<.5 Sec) 

/ Salida De 

Corriente Para 

Pico 

1000 Watt / 1000 Vatios 

1600 Watts / 1600 Vatios 

Peak Efficiency  / 

Punto Mas Alto 

De Eficiencia 

>85 % 

>85 % 

This unit is not intended for commercial use. This warranty does not apply to damage to units from misuse or 

incorrect installation/connection. Misuse includes wiring or connecting to improper polarity power sources.

RETURN / REPAIR POLICY

Before contacting THOR Manufacturing’s customer service department, please read the “frequently asked 

questions” section of our website to troubleshoot the problem. If trouble persists: 1. Call your THOR Manufacturings 

Technical Support team (1-866-955-THOR) or 2. Return defective product to place of purchase. Unless approved 

by THOR Manufacturing Management, all product shipped collect to THOR Manufacturing will be refused. Test 

items or items that are not under warranty, or units that are not defective, will be charged a minimum bench charge 

of ($50.00 US) plus taxes and shipping. A 15% restocking charge will be applied on goods returned and accepted 

as “new” stock. An RMA number (Return Materials Authorization number) from THOR Manufacturing’s Customer 

Service is required prior to returning any THOR Manufacturing products. THOR Manufacturing reserves the right 

to refuse any items sent to THOR Manufacturing without an associated RMA number.

 

Out of Warranty THOR Manufacturing product! electronic products are non-repairable, THOR Manufacturing, does 

not perform repairs on its products nor does it contract out those repairs to a third party. THOR Manufacturing does 

not supply schematics or replacement parts for any of its electronic products.

WARRANTY ACTIVATION: 

Please complete the Warranty Registration Form on the THOR Manufacturing website 

http://thorpowerproducts.com/

register-product/

. Enter the model number and product type and serial number. All THOR Manufacturing products 

must be registered within 30 days of purchase to activate this warranty. 

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other 

rights which vary from state to state or province to province. Should you have any questions, contact the THOR 

Manufacturing at 

1-866-955-THOR

. This product is not intended for commercial

Summary of Contents for PPI Series



















Reviews: