1PPS& 10MHz Input and Loop
2.4.2HD-IRD-V3 HD IRD Satellite Receiver Signal Cable Connection
Illustration:
RF IN and LOOP OUT Connection Illustration:
Users can find the RF IN and LOOP OUT interface on the device according to the
connector mark described on the rear panel illustration
One end is connected to the RF IN interface of
connected to the satellite signal source equipment or LOOP OUT interface of the previous
satellite receiver when several satellite receivers are series connection. As follows:
ASI IN and ASI OUT Connection Illustration:
Users can find the ASI IN and ASI OUT
mark described on the rear panel illustration
connected to ASI IN interface of the HD IRD
H-HD-IRD
10
Loop-outCable Illustration
HD IRD Satellite Receiver Signal Cable Connection
Connection Illustration:
Users can find the RF IN and LOOP OUT interface on the device according to the
described on the rear panel illustration, connect the cable as shown below
RF IN interface of satellite receiver while the other end
connected to the satellite signal source equipment or LOOP OUT interface of the previous
satellite receiver when several satellite receivers are series connection. As follows:
Connection Illustration:
ASI OUT interface on the device according to the connector
described on the rear panel illustration,connect the cable as shown. One end is
of the HD IRD, the other end is connected to any device that
IRD-V3 User Manual
HD IRD Satellite Receiver Signal Cable Connection
Users can find the RF IN and LOOP OUT interface on the device according to the
as shown below.
satellite receiver while the other end is
connected to the satellite signal source equipment or LOOP OUT interface of the previous
satellite receiver when several satellite receivers are series connection. As follows:
interface on the device according to the connector
. One end is
, the other end is connected to any device that
