H-2/4HD-EM(S/H)
3) TS Configuration
This encoder support TS output via ASI ports. ‘TS Config’ is for the configuration of
ASI output. Its submenus contain:
TS ID/ ON ID
Users can set the TS ID and Original Network ID in the 2 submenus. The IDs are in
hexadecimal form.
Output Bit rate
Users can set the max output bit rate for the ASI MPTS out. (Range 0-100 Mbps)
NIT Insert
Users can insert your NIT with operations in the menu.
ASI Output
Users can copy a stream from the IP out streams (1 MPTS & 8 SPTS) to output through
ASI.
3.1 TS ID
3.2 ON ID
3.3 Output Bit rate
3.4 NIT Insert
3.5 ASI Output
ON ID
0x0001
Output Bit rate
60.000 Mbps
NIT Insert
Yes No
ASI Output
MPTS
