Trouble Shooting
PILOT TROUBLE SHOOTING – cont’d.:
19
FLAME DEVICE SYSTEM (FDS) REMOVAL:
1. Turn-off the pilot.
2. Shut-off the main isolation valve and follow
the lock-out/tag-out procedure.
3. Remove the griddle plate assembly
4. Remove the FDS cover. Use 2.5mm allen key.
5. Disconnect the thermocouple from the safety
gas valve. Use 9mm spanner.
6. Disconnect the pilot tube assy. From the ODS
injector. Use 13mm spanner .
7. Remove the ODS injector from the FDS
Assembly. Use 10mm spanner to remove the
injector. Then, re-install the ODS injector to
the new FDS.
8. Remove the two mounting screws of the FDS.
Use 3mm allen key.
9. Replace the FDS if necessary.
10. Make sure to check for gas leak, using soap &
water, after part installation.
Disconnect the thermocouple
from the safety gas valve.
Remove the two mounting
screws of the FDS.
Disconnect the pilot tube from
the ODS injector.
PILOT TUBE
FITTING
ODS
INJECTOR
Remove the ODS injector.
