THOR f-m3sdi, User Manual

Page: 6 / 7

2 COM0
Command contact of the first channel contact closure
3 NC1 The second channel contact closure output
No alarm: the contact is normally­closed (NC)
Alarm: the contact is open
4 COM1
Command contact of the first channel contact closure
5 ­­
­­
2­ch contact closure input
F­M4SDI­2CC­Rx
1 K0
The first channel contact closure input
2 COM0
Command contact of the first channel contact closure
3 K1
The second channel contact closure input
4 COM1 Command contact of the second channel contact
closure
5 ­­
­­
1­ch Bi­Directional RS232
F­M4SDI­1S32
1 TXA
RS422 differential signal A output
2 TXB
RS422 differential signal B output
3 RXA
RS422 differential signal A input
4 RXB
RS422 differential signal B input
5 G
Ground
2­ch Bi­Directional RS232
F­M4SDI­2S32
1 TX1
RS232 signal output 1
2 RX1
RS232 signal input 1
3 G
Ground
4 TX2
RS232 signal output 2
5 RX2
RS232 signal input 2
Note1: The AUX interface of F­M4SDI­Tx and F­M4SDI­Rx are used in pairs, If using a transmitter with an AUX
option then the receiver must also have this option for the AUX connection to work properly
1.1
Rear Panel
Figure 2­2­1 F­M4SDI Rear Panel
Table 2­2­1 F­M4SDI Rear Panel
Name Description
DC12V
DC 12V power input interface
Requires the included 12V power supply
Protective ground (PGND) screw
Thor Fiber 2014 TEL:1­800­521­8467 EMAIL: sales@thorfiber.com http://www.thorbroadcast.com