Thor Motor Coach Class C, Owner'S Manual

Page: 45 / 97

Thor MoTor CoaCh
CoNTroLS aND oPEraTIoNS
44
Using the Firmness Control System™:
• The Firmness Control System™ is designed to make changes to one side
at a time. When the Sleep Number® disappears from the wired remote
display, changes may be made to the other side.
• To adjust the mattress to a firmer setting, push the UP arrow on the wired
remote.
• To adjust the mattress to a softer setting, push the DOWN arrow on the
wired remote.
• Some Firmness Control System™ pump models may cycle ON and OFF
several times as they find the Sleep Number®. Depending on which
digital remote you have, a flashing or blank display means adjustments are
still in process.
• The Firmness Control System™ may be heard while making changes to the
Sleep Number®.
Note: For detailed information regarding the operation and maintenance of
the Select Comfort Mattress, refer to the manufacturer's operations guide.
ELEVATED BEDS AND ELECTRIC BED LIFT SYSTEMS
EACH VEHICLE WITH ELEVATED BEDS HAS A WARNING LABEL LISTING THE
MAXIMUM LOAD CAPACITY. FAILURE TO COMPLY WITH THE LOAD CAPACITY
COULD CAUSE BED FAILURE WHICH MAY RESULT IN INJURY. ELEVATED BEDS
MAY PRESENT A FALL HAZARD WHICH MAY RESULT IN INJURY. Please consult
the owner’s manual for more information regarding elevated beds and the use of bed
rails.
Standard Elevated Beds – Various Thor Motor Coach products are equipped with standard built-in elevated
beds or bed loft areas. These beds can be upwards of 4 to 5 feet above the floor level and are often enclosed
on one, two, or three sides and sometimes even partially on a fourth side. Because there are so many
potential users and different types of elevated bed designs, elevated beds are not equipped with bed rails.
Use of Bed rails – We feel that you, as the customer, are best equipped to determine if a bed rail system is
necessary or best for you based on your intended uses, the actual users of the elevated beds, and the comfort
level of the users.
For those customers who would prefer using an elevated bed with a bed rail, there are numerous bed rail
styles, sizes, heights, and designs available, even in the style of bumpers, which can be purchased at various
retail locations and/or on the internet.
When installing a bed rail please make sure that you follow the manufacturer’s installation instructions carefully
and that you take in to account the size and height of the mattress (either originally installed by Thor Motor
Coach or later replaced by you) so that the rails are the appropriate height above the top of the mattress. This
is important because residential mattresses differ in size from the RV mattresses originally installed by Thor
Motor Coach. Please also make sure that the bed rail you select allows for adequate room to get in and out
of the elevated bed after installation, especially in the event of an emergency.
Tips for Safe Usage:
• Please use sound judgment when allowing children to sleep in any style of elevated bed.
Generally, it is not suitable for children under the age of 6 to sleep in an elevated bed or bed
loft area.
• No more than one person should be in an elevated bunk bed at once and make sure you
follow the weight restrictions posted on the warning label near the bunk beds. No more
than two people should be in a front cab over bed ( only available on Class C motor homes).
35
CAUTION