Thor Kitchen HB3001U, Owner'S Manual

Page: 24 / 28

Power Control
T he gear number on the knob and its coordinated rated power are shown in the table below. Noted that the stove is
protected from overheating, and when the stove reaches its rated power, continuous heating will not be applied.
Also noted that the stove will automatically reduce the rated power to Gear 8 after being in Gear 9 for 10 minutes
as another self-protection method.
Indication Sound
When the stove encounters operational or conditional problems, indication light will be flashing and certain sounds
will be generated as indications for users. The type of the sound and its correlated potential problems are listed
below. Noted that the sounds are different in frequency and for situations other than those on the list, please
contact the customer service for further help.
22
Gear
Watts
1 2 3 4 5 6 7 8 9
Top Left 200 300 600 800 1000 1200 1500 1800 2500
Bottom
Left 200 300 600 800 1000 1200 1500 1800 2500
Top Right 200 300 600 800 1000 1100 1200 1400 1800
Bottom
Right 200 400 600 1000 1400 1600 2000 2400 3600
Type of the sound Potential Problem
Two beeps and shut down No pans are on the stove
Two long beeps followed by three short
beeps every 5 seconds
Voltage is too low, sound will continue
until power is back to normal
Two long beeps followed by four short
beeps every 5 seconds
Voltage is too high, sound will continue
until power is back to normal
Four long beeps followed by three short
beeps every 5 seconds
Temperature of IGBT sensor is too high.
The sounds will disappear after warning
twice
Four long beeps followed by five short
beeps every 5 seconds
NTC1 sensor malfunction, the sound will
continue until the sensor is back to normal
Four long beeps followed by four short
beeps every 5 seconds
Three long beeps followed by five short
beeps every 5 seconds
NTC2 sensor malfunction, the sound will
continue until the sensor is back to normal
Three long beeps followed by four short
beeps every 5 seconds