H-4HD-EMS & EMH
Thor Fiber 2017 Tel: (800) 521-8467 Email:
www.thorbroadcast.com
3.2 Initial Status
Switch on the device and after a few seconds’ initialization, it presents start-up pictures as
below:
HD Encoder
: H-4HD-EMH or H-4HD-EMS
P1
: Program 1;
P2
: Program 2;
P3
: Program 3;
P4
: Program 4
X.XX Mbps
: indicates the current encoding bit rate of the corresponding channel.
3.3 General Settings for Main Menu
Press LOCK key on the front panel to enter the main menu. The LCD will display the
following pages where you can configure the parameters for the Thor Encoder.
Press UP/DOWN buttons to specify one item and then press ENTER to go inside its
submenus. Press MENU to step back to upper level menu.
1)
Status
Uptime
Displays the working time duration of the device. It times upon power on.
Start up…
Start OK…
HD Encoder
P1:X.XXMbps P2: X.XXMbps
3 TS Config
4 Network
5 System
1 Status
2 Input Sets
1.1 Uptime
Uptime
0 Day(s) xx-xx-xx
