September 8
th
2014
www.thonk.co.uk
14
Manhattan Analog
VCA Module
Eurorack DIY Kit
Instructions
Version 1.0
34.
Next you need to fix the other two jacks to
the panel and solder both ground pins
together to the lead. It’s easiest to thread
the ground pins onto the hanging lead
BEFORE pushing the jack barrel through
the hole in the panel.
Now there is a connection between:
1.
The ground pins on all 4 jacks
2.
The bridging resistor lead
3.
The wire to the ground pad on the
PCB
35.
Push the ground wire down between the
four jacks so it is out of the way and
secure.
Cut the
CV1
wire down (in my diagram it’s
red, yours may be a different colour) so
that it’s extending about 1cm further than
the closet vertical pin on the
CV1
jack.
Check the panel legend for reference!
36.
Strip then solder the
CV1
wire (red in my
photo) to the nearest pin on the
CV1
jack
