6
•
We recommend you adjust the antenna vertically to
ensure optimal reception.
•
In many cases, the signal strength varies depending on
the installation location. To improve reception, choose an
installation location near a window.
•
Press the
INPUT
button on the transmitter (
10
) until you are
in DAB mode (alternatively the
INPUT
button (
24
) of the
remote control).
•
For a first-time installation, an automatic station search takes
place; alternatively, press the
INFO
button (
6
) to start the
automatic station search (
Scanning
).
•
Press and hold
TUNE+ (5)
or
TUNE – (8)
to view a list of
available stations.
•
Press
TUNE + (5)
or
TUNE – (8)
to select a station from the
station list (alternatively the
TUNE +
or
TUNE -
button (
24
)
on the remote control).
•
Confirm your selection by pressing the Info button (6) or wait
until the station is automatically adjusted.
•
To program the quick-selection buttons
M1 to M3
, press
and hold one of the favourites buttons (
4
) on the station you
would like to store as a preset.
•
Press the
M Set button (7)
to view or store your complete
favourites list. For this purpose, first select stations you wish
to store and press the
M SET button (7)
. Use the
TUNE +/-
buttons to search for an empty station preset ‘
Preset Store
(Empty)
’. The station is automatically stored in this preset.
•
To get additional DAB+ station information, press the
INFO
button (
6
) repeatedly (for example, programme information,
DAB+ frequency, signal information, transmission quality,
time, date, signal strength of the transmitter, etc.).
Note:
The signal strength display of the weakest DAB+
station may be helpful in adjusting the rod antenna or
positioning the transmitting station.
8.3 Receiving and playing FM radio
•
Press the Input button (
10
) repeatedly until you are in FM
mode (alternatively the
INPUT
button (
24
) of the remote
control).
•
Press and hold
TUNE + (5)
or
TUNE- (8)
for the automatic
station search to stop at the nearest station with a strong
reception. Alternatively, you can manually set a transmission
frequency by briefly pressing the
TUNE + (5)
or
TUNE - (8)
button. This is also possible using the
TUNE+/-
buttons (
24
)
on the remote control.
•
To store the desired stations, you can now store the
transmission frequency.
•
To program the quick-selection buttons
M1 to M3
, press
and hold one of the favourites buttons (
4
) on the station you
would like to store as a preset.
•
Press the
M Set
button (
7
) to view or store your complete
favourites list. For this purpose, first select stations you wish
to store and press the
M SET
button (
7
). Use the TUNE +/-
buttons to search for an empty station preset ‘
Preset Store
(Empty)
’. The station is automatically stored in this preset.
The preset number (for example, P4) is shown in the upper-
left area of the LCD display (
9
).
•
To get additional RDS station information, press the
INFO
button (
6
) repeatedly (for example, programme information,
frequency, STEREO/MONO, time, date, etc.).
8.4 General/system settings
•
Press and hold the transmitter’s
POWER
button (
11
) for one
second to switch on the transmitter.
•
Press the
INPUT
button (
10
) repeatedly until you are in
AUX-IN
mode.
•
Press and hold the
INFO
button (
6
) for about 2–3 seconds
until ‘
System
’ appears in the LCD menu.
•
Press
TUNE + (5)
or
TUNE - (8)
to select your setting. Press
the
INFO
button
(6)
to confirm each of your entries. Use the
INPUT
button
(10)
to end your entries/changes.
•
The following menu items are available:
Time
(Date and time settings)
Confirm your selection by pressing the Info button (
6
).
Set the following information in the order listed:
Set Time/Date
Auto Update
Set 12/24 hour
Set date format
Factory Reset
(Resetting to factory settings)
Select the Factory Reset menu item.
Confirm your selection by pressing the
INFO
button
(6)
.
Press
Tune + (5)
or
Tune – (8)
to choose between YES and NO.
Confirm your selection by pressing the
INFO
button
(6)
.
Software Upgrade
Software update only for authorised dealers
SW Version
(display of the software version)
Select the SW Version menu item.
Confirm your selection by pressing the
INFO
button
(6)
.
The current software version is displayed.
8.5 Troubleshooting
8.5.1 No sound
•
Make sure that the power supply unit is correctly connected
to the wall socket and to the transmitter’s power socket.
•
Check whether the headphones are on.
•
The headphone charge level may be too low, in which case
you need to fully charge the batteries.
•
Make sure that the desired TV set or audio device is switched
on and playing sound.
•
The headphone volume may be too low.
•
The audio signal may be too low. Increase the volume on
your playback device.
•
Make sure that the transmitter and receiver (headphones) are
paired > Point 8.1.
Summary of Contents for WHP5407
