18
5
WASH AND DRY PROGRAMME RUNNING AND
ELECTRICITY CUTS
using the appliance and practical tips
PROGRAMME
RUNNING
When the programme starts up, the remaining
time until it finishes will appear on the screen.
Complementary functions can be selected at
any time, providing the corresponding washing
cycle has not finished and the programme
admits this function.
If you press the Start/Pause button during the
washing process, the washing machine will
stop and go onto PAUSE.
POWER
CUTS
If a power cut should occur, when the electricity
comes back on the washing machine will
continue functioning from where it left off (it
has a memory of several hours).
tips
To reduce noise on spin drying, level the
washing machine by regulating the adjustable
feet.
You should wash clothes of different sizes
on the same wash programme whenever
possible, as this helps distribute the clothes
inside the drum on spin-drying and improves
spin performance.
All the models have a safety system to
prevent spin-drying from starting up if the
clothes are too concentrated inside the drum.
This protects the washing machine from
vibrating excessively. If you notice that the
clothes are still too damp after spin drying,
distribute them evenly inside the drum and
then run the spin dry cycle again.
If you change the programme on the
programme selector dial during
washing and drying, the washer dryer
will automatically go onto PAUSE and
the programme running will be
cancelled.
If you need to add or remove an item,
press the Stop/Pause button. Check
there is no danger of the water
overflowing when you open the door
and that the water temperature is not
too high. To restart and continue the
washing cycle, press the Start/Pause
button again.
Important