GB
9
Receiver
Receiver
AUDIO OUT
L
R
DC 12V
VIDEO OUT
1
. Place the receiver (5) on, or near, the second television set.
2
. Connect the receiver (5) to the second television set using the lead (6) following
the same instructions as for the transmitter.
3
. Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1).
4
. Raise and extend the telescopic aerial of the receiver (5).
5
. Fit the mains supply lead (7) to the receiver and plug it into a 220/240 V ~ 50 Hz
mains power supply.
! THE ANTENNA
allows you to transmit and receive audio and video signals over a
maximum range of 30 meters in free air environments. Inside a typical lodgment the
range will be less because of signal attenuation by building material absorption.
! THE TELESCOPIC AERIAL
permits the control of the unit whose pictures you wish
to see in the room containing the second television set (TV2).
! THE POWER SUPPLY
plug fitted to the transmitter (1) is not the same as the one
fitted to the receiver (7).
TV2
Installation of receiver
VS 540 or VS 540 CA
220/240V ~ 50 Hz
VS 540 U
VS 540 CAU
VS 540
VS 540 E
VS 540 CA
VS 540 CAE
5
6
7
VS540CA 26/04/01 17:23 Page 9
