8
Instructions for use
1. Switch on the transmitter (1) and the receiver (5) by switching their on/off
buttons to the on position.
2. Make sure that the transmitter and the receiver are set to the same channel by
checking the position of the selectors located under the casing. They must be
set to the same channel (same letter).
3. Switch on your equipment (television sets, video recorders ...) in both rooms.
4. Using the remote control of the unit whose pictures you wish to see, and from
the room containing the second television set (TV2), select the channels or
video functions (or others) according to the unit you are controlling.
Special operating details:
No picture on TV2? If you fail to obtain the desired picture on the second
television set TV2, select the AV socket, to which the receiver (5) is
connected, using the television's remote control.
Canal + on TV2? In order to be visible on the second television set (TV2),
the picture coming from a decoder must pass through a video recorder
that is switched on, either in AV2 mode, or on the channel no. set aside for
Canal +. (Refer to the instruction manuals of the units concerned).
Use of a monitor? If your second television set does not have a connection
for an outside aerial (terrestrial reception), or if it is a monitor, you will be
able to see the channels in the room containing the second television set
by selecting those of the video recorder with its remote control.
The picture is scrambled? The running of certain equipment (micro-wave
ovens, digital telephone DECT, un-shielded acoustic loudspeakers, etc ...)
may interfere with signal transmission. Ensure that they are kept away
from the transmitter and the receiver or switch them off.
Make sure that you point the
remote control directly at the
receiver's (5) infrared window.
Receiver
VS530C 24/10/00 9:56 Page 8
