THOMSON VPH7090- - SETUP User Manual Download

Page: 33 / 35

To control the video

recorder, switch to

vcr a

ADDITIONAL INFORMATION

ENGLISH

Unlock the video recorder with the

(

STANDBY

) key on the remote control.

(on the display of your

video recorder).

Over 10 seconds

ELECTRONIC KEY (CHILD LOCK)

LOCK 17:45

To prevent use of the video recorder, the keys on the front can be locked. Press the

(

STANDBY

) key on the

remote control for 10 seconds and keep it in a safe place.

CONTINUOUS PLAY/RECORD

Play

6 seconds

Record

6 seconds

You can permanently play or record a tape. At the end, the tape is rewound to the beginning and continues

playing or recording. This function, used with the LP function, provides for 8 hours of continuous recording or

playback with an E240 tape.

- The 8 memories are full. You need to free a memory in order to programme again.

- The VI code is not listed. Enter the channel number.

- If you programmed 2 or more recordings with overlapping start and stop times, the menu

TIMER REVIEW

appears along with an error message (the programmed recordings are flashing). Delete the programmed

recordings with the key

0000

ERROR MESSAGES RELATED TO PROGRAMMING

Some programmes broadcast on certain channels are transmitted using VPS (Video Programme System) or PDC

(Programme Delivery Control). These signals precisely start or stop the recording even when there is a delay in the

programme schedule. Your video recorder can recognise these signals.

VPS or PDC is displayed when the programme you are watching is broadcast in VPS or PDC. In this case you can

use the functions below.

- Recording stopped by VPS

- During the recording of a VPS programme, press key

vps

. The recording will stop when

the programme is really over.

- Recording started by VPS

- Put the video recorder in pause-record mode, then press key

vps

. As soon as the VPS

programme starts, the video recorder starts to record.

VPS/PDC SYSTEM

To avoid erasing one of your tapes by accidental over-recording, we recommend you protect them by breaking the

security tab. To reuse a protected tape, just stick a piece of adhesive tape on the opening.

Tapes are sensitive to utilisation and storage conditions. Keep them away from dust, humidity or excessive heat. Do

not place them next to appliances producing important magnetic or electrical fields (electro-magnet, motor…).

There are different types of tapes. These differences are not only due to the magnetic tapes but also to the mechanical

elements of the tape. A poor quality tape can damage your video recorder. You should therefore use quality tapes or

well known brands.

VHS

Protected

Unprotected

CONCERNING VIDEO TAPES

U-T7089PE-GB/BEI/906 21/07/99 9:49 Page 31

Summary of Contents for VPH7090- - SETUP




































Search results

Summary of Contents for VPH7090- - SETUP

Reviews:

Related manuals for VPH7090- - SETUP

Brands by name

Popular brands

THOMSON VPH7090- - SETUP, User Manual

Search results

Summary of Contents for VPH7090- - SETUP

Reviews:

Related manuals for VPH7090- - SETUP

Brands by name

Popular brands