THOMSON TX 938N, Instructions For Use Manual

Page: 9 / 16

9
4 / PROGRAMMING YOUR MACHINE
— Turn the selector to choose the most suitable programme for the type of fabric to be washed.
NB: Simply turning the selector to a position other than “Off” switches the machine on.
The machine proposes the recommended temperature and spin speed for the type of fabric selected.
— If you wish:
- Alter the temperature using button ,
- Alter the spin speed (new spin speed, drain or stop with tub full) using button ,
- Select one or more options using the relevant buttons .
— Choose an immediate start by pressing the “Start/Pause” button ...
— ... Or choose to delay your cycle:
- Either by specifying the desired time for the cycle to end in “Finishing Time” mode
- Or by delaying the start of your cycle by switching to “Delayed Start” mode
(see how to proceed
in the section “SETTING THE FUNCTIONS”).
7
4
3
2
1
Display
•PROGRAMMING
•Programming a washing cycle:
The indicator lights for the
recommended temperature and spin
speed are lit, plus, on the screen: The
“Finishing Time” or the “Remaining
Time” for the suggested programme.
The indicator lights for the temperature,
the end of the cycle and the options
selected, plus, on the screen: The
“Finishing Time” or the duration of
the selected cycle (“Time Remaining”
)
The cycle progress segment is
permanently lit and the “Finishing Time”
or a countdown of the time remaining
before the cycle ends
Rapid run through of the 4 cycle
progress segments and, depending on
the case, display of the programmed
finishing time or the time remaining
before the cycle actually starts.
— Press the “Start/Pause” button to interrupt the cycle.
The “Pause” segment flashes, as well as the cycle progress segment lit at the time this option was
selected, whether the display is in “Finishing Time” or “Remaining Time” operation.
— Add or remove the item or items *.
— Press the “Start/Pause”
button to continue the cycle.
(*) It may take 1 or 2 minutes for the lid to unlock
NB: If you have selected a delayed washing cycle (in “Finishing Time” or “Delayed Start” mode), you can
access the drum immediately at any time during the phase before the washing cycle starts without
having to interrupt and restart the cycle.
7
7
•Adding or removing an item during the cycle
(impossible during spinning):
•Cancelling while programming or washing or during a pause:
— Set the selector to the “Off” position.
This operation can be performed during programming, during the waiting period before the cycle actually
starts and throughout the whole washing cycle.
It also cancels the “Children’s Safety” system.
NB: Cancellation requires you, in all the cases, to reprogramme everything from the start.
If you have cancelled during washing, remember to drain away the water if necessary.
1
For more details on the various functions, please refer to the sections “PROGRAMME DETAILS” and “DETAILS OF THE OPTIONS”.
•End of the cycle:
NB: After spinning, your washing machine automatically positions the drum opening at the top to
provide easy access to the washing. This operation lasts at most 3 minutes.
— Then, the screen shows “
Stop ”, indicating the end of the cycle.
Set the selector to the “Off” position.
You can now open the lid and remove your washing.
1
•Maintaining your machine’s performance
(Maintaining the pump filter):
You must clean the drain pump filter regularly (for how to do this, see the section “CLEANING THE PUMP FILTER”).
Important :
Your machine’s performance can be affected if you do not clean the pump filter regularly.
Important:
In the “End of Cycle” phase, when “Stop” is displayed, if one of the buttons , , or is pressed this is not taken in account but
returns you to “Programming” mode.
We recommend, as a safety measure, that, at the end of a cycle, you turn off the water tap and unplug the power cable (When you plug the cable
in again, remember to reprogramme the “Current Time”).
7 4 3 2