THOMSON TX 908N, Instructions For Use Manual

Page: 7 / 12

7
4 / PROGRAMMING YOUR MACHINE
•Maintaining your machine’s performance
(Maintaining the pump filter):
You must clean the drain pump filter regularly (for how to do this, see the section “CLEANING THE PUMP FILTER”).
Important :
Your machine’s performance can be affected if you do not clean the pump filter regularly.
100
● ● ●
1.5
1.0
● ● ●
Programmes table
Type of textile
Maximum
weight of
dry clothes
(kg)
Temperature
(°C)
Extra rinse
Drip-dry
*
Rinse hold
COTTON / WHITES / COLOUREDS - 90°
- 60°
- 30°
5.5
● ● ● ●
● ● ● ●
● ● ●
● ● ●
2.5
1.0
30°
SYNTHETICS
DELICATES
WOOL
SILK
Flash 30’
Cycle length **
h = hour
min = minute
40°
40°
2.5
Usual load
● ●
30
min
28
min
45
min
28
min
- 33
min
30
min
- 40
min
1
h
19 - 1
h
40
2
h
03 - 2
h
20
-
●
SPIN only 8
min
Intensive
*
●
●
Sleekare
*
●
Special programmes
Additional programmes
60°
● ● ● ●
5.5 COTTON / WHITES / COLOUREDS with prewash
+
2 h 40
●
●
: These functions can be used alone or in combinations: no illogical combinations can be made.
To select the most suitable programme for your type of washing, follow the instructions on the labels that most textiles bear.
Important :
** The cycle times are provided for an average value “without options”. They may vary according to the wash load, the temperature, etc.
— If you programme “Intensive”, you must add 10 to 17 minutes.
— If you programme “Extra rinse”, you must add 17 minutes.
•SOME EXAMPLES OF PROGRAMMES
*
:
Options depending on the model
•DETAILS OF THE PROGRAMMES
The main programmes provided by the machine are as follows:
•Cotton / Whites / Coloureds
If your washing comprises hard-wearing white or coloured COTTONS.
Important :
When washing coloureds do not exceed a maximum
temperature of 60°C.
NB :
During the first few minutes of the programme, your machine
automatically evaluates the washing load you have introduced and
adapts the water consumption and the length of the programme
accordingly to provide a perfect wash.
•Cotton / Whites / Coloureds with prewash +
Specially designed for heavily soiled washing (mud, blood, etc.).
A specific initial agitation in cold water precedes a phase of heating to
30°C.
This agitation phase in cold water enables the particles soiling the washing
to be removed before the water is heated.
Important :
Detergent must be placed in the " " container in the products
box.
•
This 40°C programme enables you to wash a usual load of cottons
and mixed textiles in 45 minutes while ensuring perfect washing results
and maximum energy savings.
•Synthetics
If your washing comprises of DELICATE COLOURS, HARD-WEARING
SYNTHETICS or MIXED FIBRES
•Delicates
If your washing comprises NETTING, DELICATE FABRICS or FRAGILE
TEXTILES
NB : A programme with agitation and spin phases specially adapted to
these types of fabrics
•Wool
If your washing comprises WOOLLENS or MACHINE-WASHABLE
WOOLLENS
”
NB : A programme with agitation and spin phases specially adapted to
these types of fabrics
•Silk
If your washing comprises SILK or PARTICULARLY DELICATE FABRICS
NB : A programme with a very gentle mechanical action and no
intermediate spins between rinses.
The cycle ends with a very gentle, progressive spin restricted to 600
rpm.
•Flash 30’
This programme enables you to refresh a small load of 2.5 kg of lightly
soiled washing composed of WHITES, COTTONS, COLOUREDS or
HARD-WEARING SYNTHETICS.
The cycle time is restricted to around 30 minutes
In this programme, the washing temperature is automatically programmed
at 40°C.
Important :
For this programme, the doses of detergent should be
reduced by half.
•Spin only
This allows a separate spin and drain.
Important:
In the case of "Spin only", ensure that you select a suitable
spin speed for the type of washing in the machine.