basICoPEraTIons
P9
English
resolution
If the video does not appear correctly, change the setting. These settings match the most
common settings for HDMI.
480i:
for NTSC system TV.
480p:
for NTSC system TV.
576i:
for PAL system TV.
576p:
for PAL system TV.
720p:
for NTSC or PAL system TV.
1080i:
for NTSC or PAL system TV.
TIP:
you can change the video resolution directly from view mode by pressing the
green
button on the
remote control.
Tvformat
If the video does not appear correctly, you need to change the settings. This should match the
most common setting for TVs in your country.
NTSC:
for NTSC system TV.
PAL:
for PAL system TV.
videooutput
CVBS:
CVBS output.
RGB:
RGB output.
5.3Channelsearch
Press
mEnu
and select
Search Channel
. The menu provides options to adjust the search
channel settings. Select an option and press
tu
to adjust the setting. Press
EXIT
to exit
the menu.
autosearch
Search and install all channels automatically. This option overwrites all previously
installed channels.
1. Select
Auto Search
and press
oK
or
u
to start channel search.
2. To cancel channel search, press
EXIT
.
manualsearch
Install new channels manually. This option adds new channels without changing the current
channels list.
1. Select
Manual Search
then press
oK
or
u
. The channel search screen will appear.
2. Press the
t
u
to select the channel number or enter the channel number using
[0..9]
buttons.
3. Press
oK
to start searching channels
A found channel will be saved and added to the channels list. If channels can’t be found, then
exit the menu.
TIP:
Signal quality and level indicators will show presence of the signal on selected channel frequency.
Country
Select your country of residence. It is important to set the correct country as some tuning
parameters depend on the country.
antennapower
Enable
Antenna Power
if an external active antenna is connected.
