12
Manual Search
Select a particular channel to do a search on just one (known) frequency.
Press
OK
to start the scan. The signal quality bar might
be useful to
check if the frequency is indeed in use.
Country
Select the correct country where this receiver is used. If failing to do so, may
result in that channels appear randomly in the channel list, instead of a more
logical order.
Antenna Power
Set to
On
if you use an active antenna. When set to
On
, 5 V will be present
at the
RF in
connector of the receiver. Select
Off
for passive antennas.
Scan Mode
Select between
FTA
(Free-To-Air), which will only install Free-to-Air channels
or
All
, which will install all found channels, even if they are scrambled. Then
select
Auto Search
or
Manual Search
and press
OK
to start scanning.
7.6 Time
Set up your time zone for clock/time in your menu and system.
Time Offset
The GMT time can automatically be determined from the incoming TV
broadcast if set to
Auto
. The time zone is determined from the Country
setting in the
Channel Search
menu. If set to
Manual
, you can change the
Time zone yourself in the
Time Zone
option. Default is
Auto
.
Time Zone
If the correct time cannot be obtained from the incoming TV broadcast,
change the
Time Zone
setting yourself.
Example: in case of Daylight Saving Time.
Auto Standby
As a power saving feature, the unit will switch to Standby automatically, if no
command from the remote control is received for the set time. Options are
1 Hour, 2 Hour, 3 Hour, Off
. Default is 3 hours.
Power On/Off
You can set a time to automatically switch On and/or Off the unit every day.
The unit will start on the last watched channel.
Note:
Set
Auto Standby
function to
Off
.
Power On
Set to
Enable
if you want to use the automatically switch On function.
Power On Time
Enter the switch On time with the numeric buttons on the remote control.
Power Off
Set to
Enable
if you want to use the automatically switch Off function.
Power Off Time
Enter the switch Off time with the numeric buttons on the remote control.
7.7 Option
Set up the options for languages.
OSD Language
Use
t
u
to select the language for the On-Screen Display.
Subtitle Language
Set your preference for the subtitle language priority, if available in
broadcast.
Audio Language
Set your preference for the audio language priority, if available in broadcast.
Digital Audio
Options are:
Off, PCM, RAW HDMI On, RAW HDMI Off
PCM
: All audio will be down mixed to a Stereo format on HDMI and S/PDIF
outputs.
RAW HDMI On
: Raw audio information will be passed on to the HDMI
output, without down mixing to PCM Stereo, to be passed on to and
processed by a digital amplifier or home-theatre set to produce multi-
channel audio.
RAW HDMI Off
No audio will be forwarded to the outputs.
Audio Description
AD. Useful for the visual impaired. If you like to have support of an audio
track that describes the content on screen, select the volume from the AD
audio track. Default is
Off
.
NOTE:
Audio Description depends on the broadcaster inserting such an
accompanying audio track.
7.8 System
Setup some system own features for maintenance, network and protection.
