10
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide (EPG) provides an overview on the current television programme.
This information is provided by the respective broadcaster and may not be available for all channels.
The Electronic Programme Guide is a very useful function that allows you to watch programme
schedules and information on screen and to add events for recording. Press the
EPG
button to open
it. Use
pq
or
P+/P-
to select a channel and
u
to move the highlight to the events of this channel.
In this part you can also use
pq
or
P+/P-
to select or scroll through these. The detailed information
about the selected event is shown below. If available, the current parental rating can be found in the
event details as well.
Press
GREEN
to display programme information for the next day and
RED
to return to previous day.
Simply press
OK
to set a timer for the selected event. If you have connected a HDD, you can also
press
4
to set a timer for record.
NOTE:
Availability of EPG data depends on broadcast and can be displayed for up
to14 days. If you are opening the EPG just after the receiver was switched
on or changed to another transponder we recommend to wait for a short
moment in order to collect the new data.
6.8 Recording
Your new receiver allows you to make a recording of the programme you are watching. Simply
connect a USB storage device to the USB entrée, press
4
and the record is starting. The recording
icon is shown at the upper left corner of the TV screen. To stop the recording, press
3
.
The receiver automatically reads the remaining time of the current programme from the EPG info. If
you want to change the duration for the recording, enter the recording time with the
0~9
buttons.
For a recording duration of45 min, enter 45 and press
OK
or for 1h 30 min, enter 130 and press
OK
.
NOTE:
Please connect a USB storage device formatted in FAT32 with sufficient
free space before you start a recording. In the menu
Storage Device Setup
you can format the USB-device, if necessary or if you know the device is
formatted in another format. Confirm the message displayed in TV-mode
to format your USB-device. For recording of an HD broadcast, we strongly
recommend to use a high speed USB device.
WARNING:
For encrypted channels broadcasting rights may be limited by the provider
and recording may not be possible. Recordings via the analogue output
(VCR or DVD recorder) could also be blocked. When the Maturity Rating
is activated for a certain programme, you must enter the corresponding
PIN code
Maturity Rating master PIN: 0000
to be able to record this
programme.
6.9 Timeshift
The Timeshift/Instant record function allows you to pause live broadcast and resume watching later or
to rewind to the beginning. First, connect a USB device to the USB entrée at the front panel. Then go
to menu
DVR Setup
and select option
Timeshift Status
to
Enable
. Exit by pressing from this menu
to return to live TV. In the background, after30 seconds, the Timeshift instant recording function will
start. This will automatically be repeated after every channel change you make. Press simply on the
2
to the freeze broadcast. Press again
2
to resume watching or press
u
button which will call and show
the Timeshift banner on screen. In this state you can use the navigations
t
u
or multimedia buttons
to navigate and jump in the shifted record. To show or hide it press the
button and press
3
to stop
Timeshift.