P26
sPECIfIKATIonEr
ProbLEM
MöJLIG orsAK
ATT GörA
No picture
The receiver can’t receive signal.
Check the antenna cable, replace
the cable, or connect the cable
to the receiver tightly.
Incorrect values of some tuner
parameters.
Set the values of tuner
parameters correctly in the
Installation
menu.
Wrong direction of the dish.
Check signal strength and adjust
your dish correctly.
No picture or sound on TV
The input is not selected on
your TV.
Switch to the correct TV input.
The TV is not connected to the
mains.
Bad cable connection.
Check the mains lead.
Firmly plug in the cables
between the receiver and TV.
Audio muting.
Press the
!
button.
TV power off.
Turn the TV on
Scrambled channel
message
The channel is scrambled.
Select an alternative channel.
No response to remote
control
The receiver is off.
Plug in and turn on the plug.
The handset is not aimed
correctly.
Aim the handset at the IR sensor.
The IR sensor is obstructed.
Check for obstructions.
The handset batteries are
exhausted.
Replace the handset batteries.
Password forgotten
The default password is
0000
Contact the local Service Hotline
or send an email to our support
via www.thomsonstb.net
The external USB HDD does
not start.
The power consumption is
too high.
Connect an extra power supply
adapter to your USB HDD device.
The receiver switches to
standby automatically.
The
Auto
Standby
function is
activated and has reached the
set time (default 3h).
Set the power down time or
disable it in the
System
Auto
Standby
menu.
9.0 sPECIfIKATIonEr
video
Bildförhålland:
16:9 widescreen, Pillarbox, 4:3 Pan&Scan, Letterbox
Videoupplösning:
PAL 50Hz: 576i, 576p, 720p, 1080i, 1080p
NTSC 60Hz: 480i, 480p, 720p, 1080i, 1080p
