HUVUDMENY
P17
7.3.1.3 Channel scan
Automatic scan
Satellite Scan:
Select a satellite in the left window to be scanned. More than one can be
selected. Press
bLuE
for
Scan
. A window with scan settings will be displayed.
Scan Mode:
Use
tu
to select
Default
,
Blind
Scan
or
NetWork
.
Default
:
All stored transponders in the memory will be scanned.
Blind
Scan
:
Slow scan in 2 MHz steps. The receiver will first scan the whole frequency
band to find the transponders it can lock on. After gathering all transponders,
it scans the transponders one by one to get all available programmes.
NetWork
:
Network search will be performed – when network information is broadcast,
new transponders will be found and stored.
Scan type
:
Press
tu
to select
All
Channels
(scrambled and free) or
FTA
Channels
(free to
air);
Service Type:
Press
tu
to select
ALL
,
DTV
or
Radio
.
After configuring, press
oK
or
bLuE
again to start scanning with the selected settings.
Your receiver will now perform an automatic channel search with the scanning progress shown on
screen. During the channel search you can skip transponders by pressing the
MEnu
button, or quit
the scan process with
. When the process has been completed, all found channels will be stored
and the receiver will switch to the first found channel.
Multi-Satellites Scan:
When using a multi feed antenna with more than 1 LNB, select the satellites
your antenna is adjusted to with the
oK
button. The selected satellites will
be marked by the
z
symbol. Set the appropriate LNB inputs in the DiSEqC
point and press
bLuE
for
Scan
. A window with scanning settings will be
displayed. After configuring the settings like explained in Single Satellite Scan
above, press
oK
or
bLuE
again to start Multi-Scan on all selected satellites.
7.3.1.4 scanning by transponder (Manual scan)
Press
4
for displaying the transponder list of the highlighted satellite. By pressing Press
4
again you
can switch back to the satellites list.
Single Transponder Scan:
Use the
p
/
q
buttons to highlight the transponder you want to scan and
press
oK
. Press
bLuE
for
Scan
. A window with scanning settings will be
displayed. After configuring the settings (explained in
7.3.1.3
above), press
oK
or
bLuE
again to start the scanning of the highlighted transponder.
When the scan process has been completed, all found channels will be
stored and the receiver will switch to the first found channel.
Multi-Transponder Scan:
Select the transponders you want to scan with the
oK
button. The selected
transponders will be marked with the
z
symbol. Press
bLuE
for
Scan
. A
window with scan settings will be displayed. After configuring the settings
like explained in
7.3.1.2
above, press
oK
or
bLuE
again to start Multi-Scan on
all selected transponders.
