P4
YourrECEIvEr
2.0YourrECEIvEr
2.1PIncodedefault:0000
2.2frontpanel
Fig. 1
1.
standby/onbutton:
To turn the unit ON or to standby mode.
2.
Channelup/down
To change channels without using the remote
control
3.
volumeup/down
To change volume without using the remote control
4.
remotecontrolsensor:
Receives the signal from the remote control
5.
standbyindicator:
Shows power state of the receiver
Green LED - receiver is turned on
Red LED - receiver is in standby mode
6.
lEddisplay:
Shows channel number in operation and time in
Standby
7.
usb
For connection of external storage devices
2.3rearpanel
Fig. 2
1.
saTIn
To connect to the LNB of your satellite dish for
reception of satellite broadcast signal
2.
saTouT
To loop through the satellite signal to a second
receiver
3.
s/PdIf
To connect to a digital or home cinema audio
amplifier
4.
hdmI
To connect to the HDMI input of your TV using a
good quality HDMI cable.
5.
TvsCarT
To connect to TV using a SCART cable
6.
dvd/vCrsCarT
To connect to a Video or DVD recorder
7.
Powercord
The receiver requires a mains voltage of 100~240V
AC 50~60Hz (auto selecting). Please check the
local power conditions before connecting the
receiver to the mains supply.
2.4remoteControl
Fig. 3
1.
q
Turns the receiver ON/standby
2.
!
To turn the sound on or off
3.
rEd
Alphabetic search of channels in channel list
mode; several functions in the OSD menu
and Teletext
4.
grEEn
In viewing mode: changes the resolution of the
HDMI output between 1080p, 1080i, 720p, 576p
and 576i; several functions in the OSD menu
and Teletext.