E-DOC-CTC-20080118-0035 v4.0
11
1
Installation
1.3
Connecting a Computer Using the Ethernet Cable
Requirements
Both your computer and Thomson Gateway must have a free Ethernet port.
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1
Connect one end of the Ethernet cable to one of the
yellow
Ethernet ports of your Thomson Gateway:
2
Connect the other end of the Ethernet cable to your computer.
3
Your computer is now connected to your network. No additional configuration is needed.
Reset
ON
OFF
2
3
4
1
Console
22V DC
