Then, on the handset which has not yet been registered:
you have about
2 minutes to register the handset.
l
Press
to enter the menu.
l
Select "HS register" and press
to confirm.
l
Select the base with which the handset is to be associated and press
to confirm.
"
A message will appear on the screen within 15 seconds and press
.
l
Enter the PIN code: 1590 (by default) and press
to confirm.
"
The number of the handset will be displayed within 15 seconds.
If this fails, repeat the complete operation.
6.2
REMOVING (DISASSOCIATING) A HANDSET
This operation can only be performed using the handset you want to remove
(disassociate).
l
Press
to enter the menu.
l
Select "BS Setting" and press
to confirm.
l
Enter "MASTER PIN:" 1590 (by default) and press
to confirm.
l
Select "Remove HS" and press
to confirm.
l
Enter the number of the handset you are removing (disassociating) and
press to
confirm.
7. BASE SETTING
7.1
DIALLING METHOD
You can choose tone or pulse dialling. The default is tone dialling.
l
Press
to enter the menu.
l
Select "BS Setting" and press
to confirm.
l
Enter "MASTER PIN:" 1590 (by default) and press
to confirm.
l
Select "Dial Mode" and press
to confirm.
l
Select "DTMF Dial" or "PULSE Dial" and press
to confirm.
43
STD150.qxd 12/05/04 14:02 Page 43
