Other functions
19
EN
EN
Showview/Vi (VCR)
This function provides access to the ShowView (or Vi) programming functions for a
VCR featuring them. If the function does not exist in your VCR, you open the recording
programming function .
General Off
This function is used to switch off all the devices by pressing on a single key. Press promptly (in
less than a second) twice on the
B
key and hold the key the second time.
Sound volume of a TV set
The sound volume adjustment and mute keys of a TV set remain active regardless of the mode
selected.
Sound volume of a satellite or cable receiver (SAT/CBL)
Certain satellite or cable receivers have a sound volume adjustment.The adjustment keys
allocated to the TV set sound volume adjustment can be allocated to controlling the sound
volume of a satellite or cable receiver.
1.
Press the
TV
mode key on the keyboard.
2.
Press and hold the
SETUP
(
6
) key until the red indicator remains lit (2-3 seconds) and the
display of the next screen (Setting screen). Release the
SETUP
key.
3.
Press and hold the
(
7
) key on the keypad during 5 seconds, until the red indicator blinks,
switches off during 5 seconds, and switches on.The main screen displays again. Setting is
completed.Volume control can no longer be used for the TV set, but for a satellite or cable
receiver.
Note: to return to the previous setting (volume control of a TV set), apply this procedure.
Sleep Timer
To shift your TV into standby, follow the procedure below:
1.
Activate the touch screen by pressing it.
2.
Press the
TV
key (
2
) on the keypad.
3.
Displays the second screen, by pressing the
SCREEN
button on screen.
4.
Hold the
SLEEP
key on the touch screen until the red indicator remains
On and the SLEEP screen displays.
5.
Release the
SLEEP
key.
6.
Using the numeric keys on the touch screen, enter the time before your
TV switches off (01 to 99. For times below 10 minutes, enter 2 figures,
e.g. 05 for 5 minutes).The indicator switches off, the screen changes.
7.
The sleep timer function is set. Lay your remote control opposite your TV while checking no
obstacle (object, perso, animal) is present between the TV set and the remote control.
Note: to cancel the sleep timer, hold the
SLEEP
key until you hear 2 beeps.
ROC850_en 26/09/03 16:06 Page 19
