THOMSON R7.4, Configuration Manual

Page: 25 / 44

E-DOC-CTC-20080229-0001 v1.0
19
4| Ethernet Bridge and VLANs
Modifying VLAN membership
To modify the configuration of a bridge port that is member of a VLAN, execute the command
:eth bridge vlan ifconfig
.
Three parameters must be specified:
Name : the name of the VLAN.
Intf : the name of the bridge port.
Untagged : this parameter indicates whether the bridge port is tagged or untagged member of that VLAN.
If the parameter is enabled , the bridge port is untagged member of the VLAN.
If the parameter is disabled , the bridge port is tagged member of the VLAN.
=>:eth bridge vlan iflist
Vid Name Bridge interfaces (* = untagged)
--- ---- --------------------------------
1 default OBC*, ethport1*, ethport2*, ethport3*, ethport4*, WLAN*
2 data OBC, ethport1*
=>:eth bridge vlan ifconfig name=data intf=ethport1 untagged=disabled
=>:eth bridge vlan iflist
Vid Name Bridge interfaces (* = untagged)
--- ---- --------------------------------
1 default OBC*, ethport1*, ethport2*, ethport3*, ethport4*, WLAN*
2 data OBC, ethport1
The only parameter that can be modified with this command is the parameter untagged . The
specified bridge port must already be member of the specified VLAN.