Selecting Tuner Band
1. Press
SOURCE
on the main unit or
TUNER
on
the remote control to enter Tuner mode.
2. Press
BAND / AUTO PROG / CD INFO
to select
between MW, LW or FM Radio band.
Tuning to a Station
Press
SKIP BACKWARD
or
SKIP FORWARD
to select frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press
TUNE/PRESET
to toggle TUNE and
PRESET mode.
• Press
PRESET -
or
on the
main system or
PRESET FOLDER
or on
the remote control to access the previous or
next preset station. The display first shows the
preset program number and after a few
seconds, the frequency will be displayed.
(FMPR:01 is FM preset 1)
Auto Preset Programming
(FM only)
Press and hold the
BAND / AUTO PROG / CD
INFO
button for 2 seconds to scan stations in FM
band. The stations will then be stored as preset
channels. A maximum of 32 stations can be
stored. Beware of your preset channels being
erased accidentally because the scanning and
storing process is automatic upon pressing the
button. You can stop the automatic scan by
pressing any button, but the erased stations
cannot be recovered.
Manually Setting Presets
1. Press the
TUNE/PRESET
button to enter TUNE
mode.
2. Press
SKIP BACKWARD
or
SKIP
FORWARD
to access the desired
frequency.
3. Press the
PROG/SET
button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press
PRESET -
v or
+
to move to the
desired preset number (1-32).
6. Press
PROG/SET
to store the selected
frequency at that preset.
Suppressing Stereo Signal
Press
FM ST.
to toggle between FM mono and
stereo mode. (Remote Only) “ST” is displayed in
stereo mode.
13
EN
Radio
Tips:
Your audio system has 32 preset stations.
MS4200 EN 2/3/04 9:54 AM Page 18
